Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Cisco 10-Gigabit XFP Transceiver Modules
Installation Note
Revised: February 3, 2012
Product Numbers:
This installation note provides the installation instructions for the 10-Gigabit XFP transceiver modules,
which are hot-swappable input/output (I/O) devices that plug into a 10-Gigabit port. The XFP transceiver
modules connect the system module port with a fiber-optic network.
This document contains these sections:
• Overview, page 2
• Safety, page 11
• Required Tools, page 17
• Installing the 10-Gigabit XFP Transceiver Module, page 17
• Removing the 10-Gigabit XFP Transceiver Module, page 19
• Translated Safety Warnings, page 21
• Related Documentation, page 26
• Obtaining Documentation and Submitting a Service Request, page 27
XFP-10G-MM-SR= XFP-10GLR-OC192SR= XFP10GLR-192SR-L=
XFP-10GER-OC192IR= XFP-10GER-192IR+= XFP10GER-192IR-L=
XFP-10GZR-OC192LR= DWDM-XFP-xx.xx= DWDM-XFP-C=
XFP10GLR192SR-RGD= XFP10GER192IR-RGD= XFP10GZR192LR-RGD=
To Next Page
Need help?
General
