Cisco IP DECT 6823 Handset Quick Start Guide
2 | Page
Add a Contact
1.
Press Recents and highlight the recent caller.
2.
Press More, highlight Save as Contact, and press
Select
.
3.
Highlight the category, press Select, and press Save
to save the number.
4.
(Optional) Highlight a field to add or replace other
information.
5.
Press Save and press Yes.
Call a Local Contact
1.
Press Menu > Contacts and highlight an entry.
2.
(Optional) Press the right on the Navigation ring
to select an alternate number.
3.
Press Call.
Call a Directory Contact
1.
Press Directory softkey.
2.
Scroll down to highlight an entry, or press Search,
enter a name, and press Search.
3.
Press Line and select a line to call on.
4.
Press Select.
View Your Recent Calls
1.
Press Recents.
2.
Press the Navigation ring left or right to view
different lists.
Use Push to Talk (if enabled)
1.
Press and hold Mute hard button .
2.
Talk when connected and release Mute at the end of
your message.
Assign a Speed-Dial Number
1.
Press Menu > select Contacts:
2.
Highlight a contact.
3.
Press
More
select
Speed Dial
.
4.
To reuse an existing speed-dial index entry, highlight a
number, press Unassign and press Yes.
5.
Highlight an empty speed-dial index and press Add.
6.
Press Power/End .
Access Your Voicemail
1.
Press and hold One until you hear the
ringtone.
2.
Follow the voice prompts.
Change the Volume on a Call
While on a call, press Volume up or down.
Set Do Not Disturb
1.
Press Menu .
2.
Select
Settings > Do not disturb
.
3.
Select Disabled (default) to turn off DND or select
Enabled to turn on DND.
4.
Press
Select
to save the setting.
Set the Coverage Warning
1.
Press Menu .
2.
Select Settings > Audio Settings.
3.
Highlight Coverage warning.
4.
Press Off to stop the tone or press On to play the tone.
User Guide
View the full Cisco IP DECT 6800 Series User Guide
For further information on other Masergy supported
telephones, please visit the Masergy IP Phones
webpage.
To Previous Page
Loading...
Need help?
General
