EasyManuals Logo

Cisco Nexus 5548UP User Manual

Cisco Nexus 5548UP
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
CHAPTER
1-1
Cisco Nexus 5000 Series Hardware Installation Guide
1
Overview
This chapter provides an overview of the Cisco Nexus 5000 Series switches, which include the Cisco
Nexus 5000 Platform switches and the Cisco Nexus 5500 Platform switches. The overview of each of
these switches includes information on the expansion modules, power supplies, and fan modules that you
can include with them.
This chapter includes the following sections:
Cisco Nexus 5500 Platform Switches, page 1-1
Cisco Nexus 5000 Platform Switches, page 1-29
Cisco Nexus 5500 Platform Switches
The Cisco Nexus 5500 Platform supports the following application scenarios, many of which require the
installation of other products:
As an access-layer switch, it can be used purely as a 1- and 10-Gigabit Ethernet switch,
consolidating 10 Gigabit Ethernet connections into a smaller number of server connections trunked
to the aggregation layer.
As a smaller-scale aggregation switch, it can be used as a Layer 3 1- and 10-Gigabit Ethernet switch,
consolidating multiple 1- and 10-Gigabit Ethernet connections from a data center access layer.
In conjunction with the Cisco Nexus 2248T GE Ethernet Fabric Extender, the Cisco Nexus 5500
Platform can be a high-density 1-Gigabit Ethernet switching system, consolidating more than 900
Gigabit Ethernet connections within a single management plane.
In conjunction with the Cisco Nexus 2232T 10GE Fabric Extender, it can be a high-density
switching system, consolidating more than 600 10-Gigabit Ethernet connections within a single
management plane.
In conjunction with the Cisco Nexus 2224TM 10GE Fabric Extender, it can be a high-density
switching system, consolidating more than 600 10-Gigabit Ethernet connections within a single
management plane
As a rack-level I/O consolidation platform, the switch carries Ethernet traffic from servers to the
aggregation layer and carries FC traffic to existing Fibre Channel SANs.
As a crucial element in data center I/O consolidation, the switch enables I/O consolidation at the
access layer and provides interoperability with the Cisco Nexus 5500 Platform and other
standards-based products.
This section describes the Cisco Nexus 5500 Platform switches and contains these sections:
Cisco Nexus 5596UP Switch, page 1-2

Other manuals for Cisco Nexus 5548UP

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco Nexus 5548UP and is the answer not in the manual?

Cisco Nexus 5548UP Specifications

General IconGeneral
Switching Capacity960 Gbps
Forwarding Rate720 Mpps
Rack Units1U
Product TypeSwitch
Form FactorRack-mountable
Jumbo Frame SupportYes, up to 9216 bytes
ModelNexus 5548UP
Operating SystemCisco NX-OS
Virtualization SupportYes
Max VLANs4096
Expansion Slots1 expansion slot
Power SupplyDual, Hot-swappable
CoolingFront-to-back airflow
MAC Address Table Size128000 entries
Routing ProtocolOSPF, BGP, EIGRP, RIP
Remote Management ProtocolSNMP, RMON, HTTP, Telnet
FeaturesQuality of Service (QoS)
Product SeriesNexus 5000
Uplink Port TypeSFP+
Layer SupportLayer 2, Layer 3

Related product manuals