Show Commands
show system pss shrink status details
669
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show system pss shrink status details
To display details of the last Persistent Storage Service (PSS) shrink status details, use the show system
pss shrink status details command.
show system pss shrink status details
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display details of the last PSS shrink status:
switch(config)# show system pss shrink status details
Last pss shrink started on: Tue May 12 08:08:30 2009
VDC 1:
Service "aaa" in vdc 1: pss shrink completed successfully
Service "cert_enroll" in vdc 1: pss shrink completed successfully
Service "ExceptionLog" in vdc 1: pss shrink completed successfully
Service "psshelper_gsvc" in vdc 1: pss shrink not needed (defaultcb invoked)
Service "platform" in vdc 1: pss shrink completed successfully
Service "R2D2_usd" in vdc 1: pss shrink not needed (defaultcb invoked)
Service "radius" in vdc 1: pss shrink completed successfully
Service "securityd" in vdc 1: pss shrink not needed (defaultcb invoked)
Service "tacacs" in vdc 1: pss shrink completed successfully
Service "eigrp" in vdc 1: pss shrink request not sent
Service "isis" in vdc 1: pss shrink not needed (defaultcb invoked)
Service "isis_dce" in vdc 1: pss shrink request not sent
Service "isis_otv" in vdc 1: pss shrink request not sent
Service "ospf" in vdc 1: pss shrink request not sent
Service "ospfv3" in vdc 1: pss shrink request not sent
Service "rip" in vdc 1: pss shrink request not sent
Service "eigrp" in vdc 1: pss shrink request not sent
Release Modification
4.0(1) This command was introduced.