Quick Reference
Cisco ONS 15454 SONET and SDH TL1 Command Quick
Reference Guide, Release 4.7
This guide lists TL1 commands and autonomous messages by category. It includes basic
descriptions and input and output formats supported by Cisco ONS 15454 and
Cisco ONS 15454 SDH, Release 4.7.
TL1 commands conform to the following syntax:
a:b:c:d:e: ...z;
where:
“a” is the Command Code
“b” is the Target Identifier (TID)
“c” is the Access Identifier (AID) or the User Identifier (UID)
“d” is the Correlation Tag (CTAG)
“e: ...z;” are other positions required for various commands
The TID, AID, and CTAG parameters route and control the TL1 command.
The remaining parameters provide additional information required to complete
the action requested by the command.
To Next Page
Need help?
General
