Cisco Router Cisco 3600 Installation Guide

5-32
Cisco 3600 Series Hardware Installation Guide
OL-2056-02
Chapter 5 Installing Memory in the Router
Closing the Router
Figure 5-26 Replacing the Cisco 3631 Router Cover
Step 4 Reinstall the cover screws.
Step 5 Reinstall the chassis on a rack or desktop.
Step 6 Reconnect network interface cables.
Step 7 Power ON the router.
Warning After wiring the DC power supply, remove the tape from the circuit breaker switch
handle and reinstate power by moving the handle of the circuit breaker to the ON
position.To seetranslationsofthevariouswarningsthatappearinthispublication,refer
to the Regulatory Compliance and Safety Information document that accompanied this
device.
1 Insert tabs and slide cover 2 Close cover
62491
1
2

Cisco Router Cisco 3600 Specifications

General

Brand	Cisco
Model	Router Cisco 3600
Category	Network Router
Language	English