Cisco Router Cisco 3600 Quick Reference Guide

Benefits & Advantages continued
Interface Cards for Cisco 1700, 2600XM, 3600, and 3700 Series
86
Analog Voice Interface Cards
Product Description
Supported Platforms
and Minimum Cisco
IOS Versions Comments
VIC-2FXO-M2
2-port FXO voice interface
card with battery reversal
and caller ID support for
Europe
The two-port FXO
voice/fax interface card for
Cisco voice/fax network
modules is used to
connect to PBX or key
system, and to provide off-
premise connections in
Europe only. This voice
interface card supports all
features of VIC-2FXO and
in addition battery
reversal, power denial and
caller ID.
Modular Router Solutions
Voice and Fax Integration
3700 Series – 12.2(8)T
3660 Series – 12.1(2)XH
3640 – 12.1(2)XH
3620 – 12.1(2)XH
2691 – 12.2(8)T1
2600XM Series – 12.1(14)
mainline, 12.2(12)
mainline (future),
12.2(8)T1
2650 Series – 12.1(3)T
2620 Series – 12.1(2)XH
2610 Series – 12.1(2)XH
1760 – 12.2(2)XK
[12.2(11)T–CQ3’02]
1751 – 12.2(2)XJ
(Fifth release of 12.2T)
1721 – Not Available
When used in a Cisco 2600
or Cisco 3600 Series
router, requires a voice/fax
network module: NM-1V
or NM-2V.
When used in a Cisco 1751
or Cisco 1760 Series
router, requires a DSP
module.
Requires a Cisco IOS
”Plus” feature set.
VIC-2FXO-M3
2-port FXO voice interface
card for Australia
The two-port FXO voice/fax
interface card for Cisco
voice/fax network modules
is used to connect to PBX
or key system, and to
provide off-premise
connections for Australia
only. This voice interface
card works with existing
phone and fax equipment
to provide voice and fax
services over IP, and is
compatible with H.323
standard for audio- and
videoconferencing.
Modular Router Solutions
Voice and Fax Integration
3700 Series – 12.2(8)T
3660 Series – 12.1(2)XH
3640 – 12.1(2)XH
3620 – 12.1(2)XH
2691 – 12.2(8)T1
2600XM Series – 12.1(14)
mainline, 12.2(12)
mainline (future),
12.2(8)T1
2650 Series – 12.1(3)T
2620 Series – 12.1(2)XH
2610 Series – 12.1(2)XH
1760 – 12.2(2)XK
[12.2(11)T–CQ3’02]
1751 – 12.2(4)T
1721 – Not Available
When used in a Cisco 2600
or Cisco 3600 Series
router, requires a voice/fax
network module: NM-1V
or NM-2V.
When used in a Cisco 1751
or Cisco 1760 Series
router, requires a DSP
module.
Requires a Cisco IOS
”Plus” feature set.
VIC-2DID
2-port direct inward dial
voice/fax interface card
Modular Router Solutions
Voice and Fax Integration
33700 Series – 12.2(8)T
3660 Series – 12.1(5)XM1
3640 – 12.1(5)XM1
3620 – 12.1(5)XM1
2691 – 12.2(8)T1
2600XM Series – 12.2(12)
mainline (future),
12.2(8)T1
2650 Series – 12.1(5)XM1
2620 Series – 12.1(5)XM1
2610 Series –12.1(5)XM1
1760 – 12.2(2)XK
[12.2(11)T–CQ3’02]
1751 – 12.2(2)XJ
(Fifth release of 12.2T)
1721 – Not Available
When used in a Cisco 2600
or Cisco 3600 Series
router, requires a voice/fax
network module: NM-1V
or NM-2V.
When used in a Cisco 1751
or Cisco 1760 Series
router, requires a DSP
module.
Requires a Cisco IOS
”Plus” feature set.
AccessRouter_10.21.02 10/24/02 3:31 PM Page 86

Cisco Router Cisco 3600 Specifications

General

Brand	Cisco
Model	Router Cisco 3600
Category	Network Router
Language	English