EasyManuals Logo
Home>Cisco>Network Router>RV130

Cisco RV130 Features & Specifications

Cisco RV130
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 2 of 4
Product Specifications
Table 1 lists the product specifications for the Cisco RV130.
Table 1. Product Specifications
Specifications
Description
Standards
IEEE, 802.3, 802.3u, 802.1D, 802.1p, 802.1w (Rapid Spanning Tree), 802.1Q (VLAN),IPv4 (RFC 791), IPv6
(RFC 2460), Routing Information Protocol (RIP) v1 (RFC 1058), RIP v2 (RFC 1723)
Ports
LAN, WAN, USB
Switch
Power button (on/off)
Buttons
Reset
Cabling type
Category 5e or better
LEDs
Power, VPN, USB, WAN, LAN (ports 1-4)
Operating system
Linux
Network
Network Protocols
Dynamic Host Configuration Protocol (DHCP) server
Point-to-Point Protocol over Ethernet (PPPoE)
Point-to-Point Tunneling Protocol (PPTP)
Layer 2 Tunneling Protocol (L2TP)
DNS proxy
DHCP relay agent
IGMP Proxy and multicast forwarding
Rapid Spanning Tree Protocol (RSTP)
Dynamic Domain Name System (TZO, DynDNS, 3322.org, NOIP)
Network Address Translation (NAT), Port Address Translation (PAT)
One-to-One NAT
Port management
Port mirroring
Software configurable DMZ to any LAN IP address
Session Initiation Protocol (SIP) Application Layer Gateways (ALG)
LAN
Four (4) 10/100/1000 Mbps Gigabit LAN ports with managed switch
WAN
One (1) 10/100/1000 Mbps Gigabit WAN port
Routing Protocols
Static routing
Dynamic routing
RIP v1 and v2
Inter-VLAN routing
Network Address Translation
(NAT) Protocol
Port Address Translation (PAT), Network Address Port Translation (NAPT)
VLAN Support
Port-based and 802.1Q tag-based VLANs
Number of VLANs
5 active VLANs (3-4096 range)
IPv6
Dual-stack IPv4 and IPv6
6to4 tunneling
Stateless address auto-configuration
DHCPv6 Server for IPv6 Clients on LAN
DHCP v6 client for WAN connectivity
Internet Control Message Protocol (ICMP) v6
Static IPv6 Routing
Dynamic IPv6 Routing with RIPng
Network Edge (DMZ)
Software configurable to any LAN IP address
Layer 2
802.1Q-based VLANs, 5 active VLANs

Other manuals for Cisco RV130

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco RV130 and is the answer not in the manual?

Cisco RV130 Specifications

General IconGeneral
Ethernet LANYes
Cabling technology10/100/1000Base-T(X)
Networking standardsIEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1w, IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet interface typeGigabit Ethernet
Dual-bandNo
Ethernet LAN (RJ-45) ports4
Supported network protocolsPPPoE, PPTP, L2TP, DNS, IGMP, RSTP, NAT, PAT, SIP, ALG
Web-based management-
Security algorithmsAES
Product colorBlack
CertificationFCC, CE, IC
Input current2 A
Output voltage12 V
Power source typeDC
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 90 %
Operating relative humidity (H-H)10 - 85 %
Weight and Dimensions IconWeight and Dimensions
Weight- g

Related product manuals