Cisco RV130W Quick Guide

How to Reboot and Reset to Factory Default
Settings on the RV130 and RV130W
Objective
The factory default reset erases all configuration settings that have been modified by the
user, and restores the device to its original settings. This may be helpful if you lose the
password to a device and wish to regain access. Performing a reboot restarts the device with
a saved configuration.
The objective of this document is to show you how to reset to factory default settings and
how to reboot the RV130 and RV130W.
Applicable Devices
• RV130
• RV130W
Software Version
• v1.0.1.3
Reset to Factory Default Settings
The router can be reset to the factory default settings through either the web configuration
utility or the reset button on the back of the router.
Reset with the use of the Web Configuration Utility
Step 1. Log in to the web configuration utility and choose Administration > Restore
Factory Defaults. The Restore Factory Defaults page opens:
Step 2. To reset the device, click the Default button. This will erase all current
configurations.

Cisco RV130W Specifications

General

DSL WAN	-
Ethernet WAN	Yes
SIM card slot	No
Wi-Fi band	Single-band (2.4 GHz)
Wi-Fi standards	Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standard	Wi-Fi 5 (802.11ac)
WLAN data transfer rate (max)	1000 Mbit/s
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.1D, IEEE 802.1p, IEEE 802.1w, IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
USB 2.0 ports quantity	1
Supported network protocols	DHCP, PPPoE, PPTP, L2TP, DNS, IGMP, RSTP
Antennas quantity	2
Security algorithms	WEP, WPA, WPA2-PSK
Product type	Tabletop router
Product color	Black
LED indicators	LAN, Power, USB, WAN, WLAN
Output voltage	12 V
Power source type	DC
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 85 %