4 Cisco RV340W Router Quick Start Guide
DIAG
Off when the system is on track to bootup.
Slow blinking red (1Hz) when the firmware
upgrade is in progress.
Fast blinking red (3Hz) when the firmware
upgrade is failing.
Solid red when the system failed to boot-up with
both active and inactive images or in rescue
mode.
LINK/ACT
of
WAN1, WAN2 and
LAN1-4
Off when there is no Ethernet connection.
Solid green when the GE Ethernet link is on.
Flashing green when the GE is sending or
receiving data.
GIGABIT of
WAN1,
WAN2 and LAN1-
4
Solid green when at 1000M speed.
Off when at non-1000M speed.
DMZ
Solid green when the DMZ is enabled.
Off when the DMZ is disabled.
VPN
Off when no VPN tunnel is defined, or all defined
VPN tunnels have been disabled.
Solid green when at least one VPN tunnel is up.
Flashing green when sending or receiving data
over VPN tunnel.
Solid amber when no enabled VPN tunnel is up.
Wireless
LED is on when the internal access point is
enabled.
LED is off when the internal access point is
disabled.