www.dmrcom.com
Getting to Know the Cisco SPA 303 IP Phone
1) Handset – Pick up to place or answer a call
2) Message Waiting Indicator - Displays solid red when you have a new voice mail
message. Flashes red during an incoming call or when the phone’s firmware is being
updated.
3) LCD Screen – Displays solid red when you have a new voice mail message. Flashes
red during an incoming call or when the phone’s firmware is being updated.
4) Line Keys - Indicates phone line status. When lit:
Green: Line is idle.
Red (steady): Line is active or in use.
Red (blinking): Line is on hold.
Orange: Line is unregistered and cannot
be used.
5) Soft Keys - Press a soft key button to
perform the action shown on the label on
the LCD screen above.
6) Navigation button - Press an arrow to
scroll left, right, up, or down through items
shown on the LCD screen.
7) Messages button - Press to access voice
mail.
8) Hold button - Press to place a call on
hold.
9) Set up button - Press to access a menu to
configure features and preferences (such
as your directory and speed dials), access
your call history, and set up functions
(such as call forwarding).
10) Mute button - Press to mute or unmute
the phone. When phone is muted, the button glows red. A flashing mute button indicates
the network connection cannot be found.
11) Headset button - Push to turn the headset on or off. When the headset is on, the button
glows green
12) Volume button - Press + to increase the volume and - to lower the volume of the
handset, headset, speaker (when the handset is off the phone), or ringer volume (when
the handset is on the phone).
13) Speaker button - Push to turn the speaker on or off. When the speaker is on, the button
glows green.
14) Keypad - Use to dial phone numbers, enter letters, and choose menu items.
To Next Page
Need help?
General
Weight and Dimensions
