Cisco SPA112 Setup Guide

Cisco SPA112 \ Cisco SPA122
1. Setup occurs in the web interface. To log into it, enter the gateway IP address in your
browser’s address bar. You can find the gateway IP address by connecting a phone to it
and dialing ****110#. The default username and password are both admin.
2. Open Voip>SIP and enter the following RTP port range:
RTP Port Min: 1024
RTP Port Max: 65455

Cisco SPA112 Specifications

General

Supported network protocols	IPv4, IPv6, ARP, DNS, SRV, DHCP, PPPoE, ICMP, TCP, UDP, RTP, RTCP, SNTP
DHCP client	Yes
VPN support	802.1p
Security algorithms	SSL/TLS
Authentication method	SIP
Modem (RJ-11) ports	2
Ethernet LAN (RJ-45) ports	1
Voice codecs	G.711, G.726, G.729
Certification	FCC, CE, ICES, A-Tick, RoHS, UL
Fax compatibility	T.38
Output current	2 A
Output voltage	5 V
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Storage temperature (T-T)	-25 - 70 °C
Operating temperature (T-T)	0 - 45 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Width	101 mm
Height	28 mm
Weight	153 g