Cisco SX10 User Manual

Place Call
To enter numbers just
press the corresponding
keys on the remote.
To invoke the virtual
keyboard, use the left
arrow Cursor key to move to the 123 eld. You may now
move about the keyboard and select characters. Press OK
to select a character.
Select the green Call eld on the scren or press the green
Call button on the remote to place the call
Use the Cursor keys of
the remote control to
select the Search or Dial
eld, as outlined.
Make sure Call is selected
and press OK or the green
Call button on the remote
control.
Place Call from Contact List Change the Screen Layout
Receive or Decline Calls
Once an entry has been
located, press OK on the
remote control to invoke
the Call menu. Then press
the green Call button or
the OK button on the remote control to place the call.
Use the Cursor keys on
the remote control to
go between Favorites,
Recents and Directory
and then down in one of
the lists.
Make sure Call is selected
and press OK or the green
Call button on the remote
control.
Use the Arrow keys on
the remote control to
move horizontally to the
new layout you would like
to use and press OK.
Navigate to Layout ( ) in
the upper right corner and
press OK on the remote
control. This icon will
appear only when relevant.
Quick Reference Guide
Cisco TelePresence SX10, SX20
CE8.0
If someone calls you,
you may accept, decline
or ignore the call.
If you decline the call,
busy information will be
sent to the calling party.
You may also use the
keys on the remote
control directly.

Cisco SX10 Specifications

General

Brand	Cisco
Model	SX10
Category	Conference System
Language	English