EasyManuals Logo
Home>Cisco>Server>UCS C240 M3

Cisco UCS C240 M3 User Manual

Cisco UCS C240 M3
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
Cisco UCS C240 M3 High-Density Rack Server (Small Form Factor Disk Drive Model)
16
CONFIGURING the SERVER
Caveats
For optimum performance:
Populate at least one DIMM per memory channel per CPU
Do not mix DIMMs with different voltages, frequencies, or types (registered and
unregistered). If you mix 1.35 V and 1.5 V DIMMs, the system defaults to the 1.5 V
mode. If you mix DIMM frequencies, the system defaults to the lower frequency.
DIMMs for CPU 1 and CPU 2 (when populated) must always be configured identically.
Memory mirroring reduces the amount of available memory by 50% (quantity of DIMMs must
be even for mirroring).
When single- and dual-rank DIMMs are populated for 3DPC, always populate the dual-rank
DIMM in the blue DIMM slot first (blue slot) and the single-rank DIMM last in the black DIMM
slots (only the 4GB DIMMs are single-rank; all other DIMMs that Cisco offers on this server are
dual-rank).
By default, all DIMMs run at 1.35 V, which yields 1333-MHz memory speeds. To run the
memory DIMMS at 1600 MHz, you need to go into the BIOS or set the policy with UCSM
(service profile) to run in Performance Mode. This forces the DIMMs to operate at 1.5 V and
yields 1600-MHz speeds, provided:
The DIMMs are 1600-MHz devices
The CPUs chosen support 1600-MHz operation
There are less than 3 DIMMs per channel
With 3 DIMMs populated per channel, memory always runs at 1.5 V regardless if the BIOS
setting is low-power mode (1.35 V) or performance mode (1.5 V).
For more information regarding memory, see CPUs and DIMMs, page 48.
NOTE: Memory speed is limited to 1066 MHz for 3 DPC configurations.

Other manuals for Cisco UCS C240 M3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco UCS C240 M3 and is the answer not in the manual?

Cisco UCS C240 M3 Specifications

General IconGeneral
Processor cores8
Processor modelE5-2600
Processor frequency2.7 GHz
Number of processors installed2
HDD size2.5 \
RAID supportYes
HDD interface-
Optical drive typeNo
Total storage capacity300 GB
Maximum storage capacity- TB
Number of HDDs installed16
Memory slots24
Internal memory96 GB
Memory clock speed1866 MHz
Internal memory typeDDR3-SDRAM
Maximum internal memory- GB
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
PCI Express x8 slots3
Chassis typeRack (2U)
Power supply650 W
Operating altitude0 - 3000 m
Non-operating altitude0 - 12000 m
Operating temperature (T-T)-40 - 70 °C
Storage relative humidity (H-H)5 - 93 %
Operating relative humidity (H-H)10 - 90 %
Harmonized System (HS) code84714100
Weight and Dimensions IconWeight and Dimensions
Depth712 mm
Width445 mm
Height87 mm

Related product manuals