Cisco UCS C240 M3 User Manual

Cisco UCS C240 M3 High-Density Rack Server (Small Form Factor Disk Drive Model)
CONFIGURING the SERVER
23
Approved Configurations
(1) Onboard RAID, Mezzanine Cards, and all Plug-In RAID Controllers
■ If you have not selected an onboard RAID upgrade option (ROM5 or ROM55), a mezzanine
card, or a plug-in RAID controller, you may select up to 4 SATA-only drives from
Table 8.
■ For systems with a 16-drive backplane with no SAS expander:
— Select up to 8 drives for ROM5 or ROM55 embedded RAID upgrade or a mezzanine
card.
— Select up to 16 drives for 9266-8i or 9266CV-8i controllers.
■ For systems with a 24-drive backplane with SAS expander:
— If you selected a ROM5 or ROM55 embedded RAID upgrade, no drives are supported.
— Select up to 16 drives for mezzanine cards.
— Select up to 24 drives for 9266-8i or 9266CV-8i controllers
Caveats
■ You can mix SATA and SAS drives.

Cisco UCS C240 M3 Specifications

General

Processor cores	8
Processor model	E5-2600
Processor frequency	2.7 GHz
Number of processors installed	2
HDD size	2.5 \
RAID support	Yes
HDD interface	-
Optical drive type	No
Total storage capacity	300 GB
Maximum storage capacity	- TB
Number of HDDs installed	16
Memory slots	24
Internal memory	96 GB
Memory clock speed	1866 MHz
Internal memory type	DDR3-SDRAM
Maximum internal memory	- GB
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
PCI Express x8 slots	3
Chassis type	Rack (2U)
Power supply	650 W
Operating altitude	0 - 3000 m
Non-operating altitude	0 - 12000 m
Operating temperature (T-T)	-40 - 70 °C
Storage relative humidity (H-H)	5 - 93 %
Operating relative humidity (H-H)	10 - 90 %
Harmonized System (HS) code	84714100

Weight and Dimensions

Depth	712 mm
Width	445 mm
Height	87 mm