A-2
Catalyst 6500 Series Supervisor Engine Guide
OL-7397-03
Appendix A Pluggable Transceivers
For up to date information on which models of a specific type of transceiver are supported on a
supervisor engine, refer to the transceiver compatibility matrices at the following url:
http://www.cisco.com/en/US/products/hw/modules/ps5455/products_device_support_tables_list.html
For transceiver installation and removal instructions, refer to the individual transceiver installation notes
at the following url:
http://www.cisco.com/en/US/products/hw/modules/ps5455/prod_installation_guides_list.html
To clean the optical connectors on transceivers and the fiber optic cable, use a CLETOP cassette cleaner
and follow the product directions. If a CLETOP cassette cleaner is not available or if you want additional
cleaning information, refer to the Inspection and Cleaning Procedures for Fiber-Optic Connections
document at the following URL:
http://www.cisco.com/en/US/tech/tk482/tk876/technologies_white_paper09186a0080254eba.shtml
Warning
Invisible laser radiation may be emitted from disconnected fibers or connectors. Do not stare into
beams or view directly with optical instruments.
Statement 1051
To Next Page
Loading...
Need help?
General
