EasyManuals Logo
Home>Clarion>Marine Equipment>CMD5

Clarion CMD5 User Manual

Clarion CMD5
38 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #27 background imageLoading...
Page #27 background image
Sirius Satellite Operations
27
CMD5
English
Notes:
When the category selection mode is entered, the
category of the last received channel is displayed
first.
The category selection mode is canceled when no
channel with the selected category can be found.
Press the [E] or [e] button within 7 seconds after a
channel has been set to continue seeking
channels up or down. The category selection
mode is canceled and normal reception is resumed
if no operation is performed for 7 seconds.
Presetting a category
A category can be preset by registering specific
categories in [DIRECT] buttons 1 to 6. Then the
desired category can be recalled by pressing the
corresponding [DIRECT] button.
1. Press the [CAT] button to enter the category
mode.
2. Turn the [VOLUME] knob clockwise or
counterclockwise to select a category.
3. Press and hold one of the [DIRECT] buttons
for 2 seconds or longer to store the current
category into preset memory.
Notes:
When the name of a channel stored in memory is
changed by a broadcasting channel, the display
may show a channel name that differs from the
stored name.
A channel stored in memory may be discontinued
at the option of the broadcasting channel.
Scan function
There are 2 scan modes: a category scan mode
and a preset scan mode.
During scanning, channels are displayed in
abbreviated form and the display mode cannot
be switched.
Category scan
In a category scan, broadcast channels in the
same category as the current channel are
selected about every 10 seconds.
1. Press the [ENT] button to start a category
scan.
2. Press the [CAT] button, a [DIRECT] button,
the [E] or [e] button to cancel a category
scan.
Note:
Category scanning is not available when no
category is defined for the current channel.
Preset scan
A preset scan scans the channels (up to 18
channels) stored in the preset memory about
every 10 seconds.
1. Press and hold the [ENT] button for 2 seconds
or longer to start a preset scan.
2. Press the [CAT] button, a [DIRECT] button,
the [E] or [e] button to cancel a preset scan.
To verify your SIRIUS ID
For more information, see “Verifying your
SIRIUS ID (Sirius mode only)” in “Common
Operations”.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Clarion CMD5 and is the answer not in the manual?

Clarion CMD5 Specifications

General IconGeneral
BrandClarion
ModelCMD5
CategoryMarine Equipment
LanguageEnglish

Related product manuals