Clevo W955LU User Manual

Disassembly
2 - 6 Removing the Hard Disk Drive
2.Disassembly
Removing the Hard Disk Drive
The hard disk drive can be taken out to accommodate other 2.5" serial (SATA) hard disk drives with a height of 7.0mm
(h). Follow your operating system’s installation instructions, and install all necessary drivers and utilities (as outlined in
Chapter 4 of the User’s Manual) when setting up a new hard disk.
Hard Disk Upgrade Process
Figure 2
HDD Assembly
Removal
a. Remove the screws.
b. Remove the bottom
cover.
c. Locate the HDD assem-
bly.

HDD System Warning
New HDD’s are blank.
Before you begin make
sure:
You have backed up
any data you want to
keep from your old
HDD.
You have all the CD-
ROMs and FDDs re-
quired to install your op-
erating system and
programs.
If you have access to
the internet, download
the latest application
and hardware driver up-
dates for the operating
system you plan to in-
stall. Copy these to a re-
movable medium.
1. Turn off the computer, turn it over to remove the battery (page 2 - 5).
2. Remove the screws - (Figure 2a).
3. Lift the bottom cover up from point (Figure 2b).
4. The hard disk drive will be visible at point (Figure 2c
).
1
13
14
15
16
1
a.
b.

14. Bottom Cover
•13 Screws
10
15
11
13
2
3
4
5
9
6
8
7
16
14
c.
12

Clevo W955LU Specifications

General

Brand	Clevo
Model	W955LU
Category	Laptop
Language	English