4
M0CZ00007-03
Main functions of the System.
Management of all ELFOSystem elements through the "touch screen"
panel or remotely with the use of the dedicated App, if there is an
internet connection module.
Heat pump for:
hot and cold water for radiators, radiant panels and fan convectors;
domestic hot water (DHW).
ELFOFresh for:
renew air by heating or cooling it;
manage the ambient humidity by controlling the intake air
humidity ;
air-condition in seasons when the heat pump, terminals and radiant
panels or radiators are not necessary;
renew and filter air without heating or cooling it (ventilation only).
Production of domestic hot water, for which it is possible to set:
the maximum temperature of water inside the storage tank;
time bands where water is taken to storage maximum temperature
or kept at a maintenance temperature;
production only with solar panels;
production with boiler integrated.
Area Divisions:
the house can be divided into homogeneous areas depending on
the type of use (day or night area, up to a limit of 12 areas);
a different hour schedule can be combined with each area, either
from other areas or from day to day of the week;
programs are common to all areas
in one area, three operation modes can be set, comfort, economic
or off;
for comfort and eco modes, temperature and humidity set points
can be configured together with the type of ventilation;
an area can be forced in the required operation mode for a certain
period, "stopping" temporarily the ongoing program .
Setpoint:
each area has a comfort setpoint (optimal comfort, greater
consumption) and an economic set (medium comfort, minimum
consumption);
the economic set is calculated adding (in summer) or subtracting
(in winter) a set value to the comfort set point;
the set point can be modified manually, any time .
Programs:
a program can be selected among 7 available and modified
according to the requirements;
the time schedule sets the operation mode (comfort, economic or
off) for each hour of the day and each day of the week;
new programs can be added.
Domotic systems connection
Connection with the App
MAIN FUNCTIONS
Indications for the use
Keep this manual in an accessible place for the operator.
In case of breakdown or malfunction:
immediately deactivate the system.
contact an assistance service centre authorized by the manifac-
turer.
use original spares parts only
Ask the installer to be prepared on:
start-up / shutdown;
set-point and scheduling personalization;
maintenance;
what to do / what not to do in case of breakdown.
To Next Page
Need help?
General