CLIVET MSAN-XMI 260T User Manual

10
Preliminary indications
2 PRELIMINARY INDICATIONS
2.1 Combinations of outdoor/indoor units
Indicated in the table are:
– the maximum power obtainable (total power);
– the maximum quantity of indoor units that can be installed in relation to the power of the outdoor unit installed
(Max indoor units).
l
WARNING
The total power of the indoor units must be the same or less than the power of the outdoor unit. Otherwise
the cooling/heating eect would be compromised.
When all the indoor units of the system are not running at the same time, the maximum total power of the
indoor units can reach 130% of the power of the outdoor unit.
If the system is used in an environment where there is an extreme climate (outdoor air temperature too high
or below -10 °C), the total power of the indoor units must be less than the power of the outdoor unit.
Total power (Hp)
Single unit power (Hp)
Max
indoor
units
Total
capacity
of indoor
units
(power)
80M
8Hp
105M
10Hp
120M/T
12Hp
140M/T
14Hp
160M/T
16Hp
180T
18Hp
2.5
°°
4
45%~130%
3
°°
5
4
°°
6
5
°°
6
6
°°
7
6.5
°°
9

CLIVET MSAN-XMI 260T Specifications

General

Brand	CLIVET
Model	MSAN-XMI 260T
Category	Air Conditioner
Language	English