34
Use
6.4 Airflow angle control
As hot air rises and cold air falls, the distribution of
heated/cooled air in a closed room can be improved by
positioning the unit’s louvers.
The angle of the louvers can be adjusted by pressing the
[SWING] button on the remote control.
l
WARNING
– During the heating phase, the horizontal air
flow will enhance the uneven distribution of
the room temperature.
– In Cooling mode, do not leave the ventilation
louver at an angle that is too vertical for a
prolonged period. In this position condensate
may form on the louver fin, which may then
fall on the floor and furniture.
Auto-swing
Press SWING to continuously swing the louvers up and
down.
Manual swing
Adjust the louvers to enhance the hot or cold effect.
During cooling, adjust the ventilation louvers horizontally.
Fig. 50
During heating, adjust the ventilation louvers downwards.
Fig. 51
To Next Page
Loading...
Need help?
General
