How to Use and Enjoy Your Coleman
®
120V QuickPump
™
Please call or write us with any comments or questions.
The Coleman Company, Inc. • 3600 N. Hydraulic • Wichita, KS 67219 U.S.A.
1 800 835-3278 • TDD: 316 832-8707 • www.coleman.com
Sunbeam Corporation (Canada) Limited
DBA Jarden Consumer Solutions • 20B Hereford Street • Brampton, ON L6Y 0M1
Manufactured in China
© 2009 The Coleman Company, Inc.
Coleman
®
, , and are registered trademarks and QuickPump™ and Double-Lock™ are trademarks of
The Coleman Company, Inc.
The Coleman Company, Inc. has been
making people comfortable in the great
outdoors since 1901. We’ve lit your
way, cooked your food and warmed
your nights. Our products have helped
make a million memories. People from
all over the world have counted on
Coleman time and again for innovation
and dependability. That’s why, for over
a century, our dedication to quality
shines on.
To begin inflation, open external
cap and pull firmly on the lanyard
to extend out. This will open
internal yellow seal.
Attach adapter nozzle to
inflation end of pump. Insert
pump and turn on.
When fully inflated, seal valve
by pushing in with pump nozzle.
This will seal the internal yellow
stopper and keep air from
escaping while closing cap.
Fully remove pump and close
external cap. Valve should
appear depressed into itself.
Remove adapter nozzle from
inflation end and attach to
deflation side of pump. Repeat
same steps as inflation. This
will draw the air out quickly.
Inflating Coleman
®
Double-Lock™ Valve
Deflation
CAUTION: Do not block the air portals during
operation, this could damage the motor.
3130597
4010005112 (20090127)
To Next Page
Need help?
General
