ComfortNET CTK01 User Manual

INSTALLATION POWER UP SETUP USAGE GUIDE ADVANCED MENUS
INSTALLATIONPOWER UPSETUPUSAGE GUIDEADVANCED MENUS

18
 
19

us I n g t h e th e r M o s t a t
us I n g t h e th e r M o s t a t
te m P o r a r y Pr o g r a m oV e r r i D e
This feature will override the program temperature setting until the next program
period begins. Touch or keys to adjust the temperature. The display will indicate
“Temporary Hold At” to the left of the set-point temperature. To cancel the temporary
setting before the next period begins, touch Run Schedule to return to the program.
Example: If you turn up the heat during the Morning program, it will remain at the new
temperature until the time for the next program period (Day).
Pe r m a n e n t te m P e r a t u r e ho l D
The Permanent Temperature Hold feature bypasses the program and allows you to
adjust the temperature manually as needed. The temperature you set in HOLD will
be maintained indenitely. Touch Run Schedule to cancel HOLD and resume the
programmed schedule.
Touch or keys to adjust the temperature. The Hold key will appear on the screen.
Touch the Hold key to maintain the new set-point temperature. ”Hold At” will display to
the left of the temperature set-point. To cancel the permanent hold setting at any time
and return to the program, touch Run Schedule.
Example: If you turn up the heat during the morning program and touch the Hold key,
it will remain at the new temperature until you touch Run Schedule or you manually
adjust to another temperature.
no n -Pr o g r a m m a B l e mo D e
If Program days per week is set for 0 Days (Non-programmable) in the Thermostat
Options Conguration Menu, the thermostat will not follow any program periods. Touch
the SYSTEM key to select Heat or Cool and use the or buttons to adjust the
temperature to your desired setting. After selecting your desired settings you can also
touch the SYSTEM key to select AUTO to allow the thermostat to automatically change
between Heat and Cool. If the SYSTEM key is touched to select Auto the thermostat will
change to Heat or Cool, whichever ran last. If it switches to heat but you want cool, or it
changes to cool but you want heat, touch both or keys simultaneously to change
to the other mode.
Ch o o S e t h e fan Se t t i n g (au t o o r on)
FAN Auto is the most commonly selected setting and runs the fan automatically when
the heating or cooling system is on during a program period.
Fan On selection runs the fan continuously for increased air circulation or to allow
additional air cleaning. When FAN is selected On, it will run at the speed selected in the
Thermostat Options Conguration Menu.
Fan Prog - When a period that has FAN Prog in the program begins, the fan will turn on
and stay on during the complete period. The display will show FAN On Prog.
Ch e C K Sy S t e m St a t u S
If the Home Screen Display indicates “Call
for Service” and “Check <Equipment
Name>” in the scrolling message area, there
is a fault in the system. When this message
is displayed, contact your heating and
cooling service contractor or the installing
contractor for service.
ma i n t e n a n C e re m i n D e r me S S a g e
A reminder will display in the scrolling
message area when it is time for accessory
maintenance if selected in the Thermostat
Options Conguration Menu. When a
reminder appears, it can be cleared by
touching the Clean Display key. This will
also reset the timer to begin a new time
period for the reminder.
Air Filter Maintenance - When the system
has run for the selected length of time, the
scrolling message area will show “CHANGE
FILTER”.

ComfortNET CTK01 Specifications

General

Brand	ComfortNET
Model	CTK01
Category	Thermostat
Language	English