Disclaimers 01
Welcome 02
Parameters
Unboxing 04
Assembly & Connection 05
Software & Driver 09
Off-line controler 14
Tool setting gauge block 19
Operation precautions and maintenance 20
Q&A 21
Catalog
1.COMGROW cannot verify and ensure that you are assembling the ROBO CNC correctly. We are not responsible for and expressly disclaim liability for loss,injury, damage
or expense associated with the assembly, handling, storage, use or other disposal of the product.
2. The information in this manual is provided without warranty of any kind, either expressed or implied.
3. Please be careful when using the CNC machine. This machine is an electrical device with moving parts and dangerous areas.
4. The ROBO CNC machine is for indoor use only.
5. You must be 18 years of age or older to operate this machine, unless under the supervision of an adult skilled in the use of this machine.
6. Please wear appropriate personal protective equipment (safety glasses, etc.).
7. Please place the CNC machine on a stable surface.
8.ROBO CNC machine provides switchable power supply 230 VAC or 110 VAC. It is forbidden to use different power supply, it may lead to machine malfunction or even
damage.
9. Please make sure that the emergency stop button is functional at all times.
10. Do not disassemble the power supply or electrical components. This will void the warranty.
11. Do not touch the machine spindle or place any body part near the work area while the machine is running.
12. Please do not allow children near the machine, as damage may occur even if the CNC machine is not working.
13. Please do not run the machine unattended.
14.Please make sure your CNC machine is in a well ventilated area. Some materials may emit fumes during operation.
Before operating the ROBO CNC, please read the instruction manual carefully. This is to avoid undesirable results that may damage the CNC
machine or cause personal injury. Anyone operating a CNC machine should know and understand the content of this manual.
Disclaimers
01
03
To Next Page
Loading...
Need help?
General
