Craftsman 113.225705 User Manual

For Future Reference
MODEL NO.
113.225705
Serial
Number
Model and serial numbers
may be found on the back side
of the base.
You should record both model
and serial number in a safe
place for future use.
FOR YOUR
SAFETY
OSCILLATI
DLE S,
, assembly
• operating
• repair parts
®
READ ALL
iNSTRUCTIONS
CAREFULLY
.... J
Sears, Roebuck and Co., Hoffman Estates, IL. 60179 U.S.A.
Part No. SP6031

Craftsman 113.225705 Specifications

General

Brand	Craftsman
Model	113.225705
Category	Sander
Language	English

Summary

Safety Instructions for Oscillating Spindle Sander

Before Using The Sander

Key steps before operating the sander, including assembly and learning controls.

Before Each Use

Safe Work Practices

Avoid Throwbacks

When Sander is Running

Instructions for operating the sander and what to do if issues arise.

Electrical and Motor Information

General Electrical Connections

Basic safety guidelines for electrical connections and servicing.

Power Supply and Motor Specifications

Details on voltage, amperage, and motor type for the sander.

110-120 Volt, 60 Hz. Tool Information

Specifics on voltage, grounding, and plug compatibility.

Motor Safety Protection

Measures to protect the motor from damage and ensure safe operation.

Assembly

Bolting Spindle Sander To Workbench

Steps for securely fastening the sander to a workbench.

Changing Sleeves and Drums

Changing and Installing Sanding Sleeves

Step-by-step guide for replacing sanding sleeves and drums.

Selection Of Spacer Ring Inserts And Upper Spindle Washers

Guide to selecting correct spacer rings and washers for sanding sleeves.

Operating the Spindle Sander

On-Off Switch Operation

Detailed instructions on using the sander's switch and its locking feature.

Basic Sanding Operation

Sanding Sleeve Selection

Choosing the correct size, grit, and type of sanding sleeve for the job.

Sanding Procedure

How to properly feed the workpiece against the sanding sleeve.

Feed Direction Guidelines

Explains the correct direction to feed the workpiece for safety and effectiveness.

Troubleshooting

Common Troubles and Remedies

A guide to diagnosing and fixing common issues with the sander.