To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 113.24140 and is the answer not in the manual?
General| Model Number | 113.24140 |
|---|---|
| Type | Table Saw |
| Blade Diameter | 10 inches |
| Voltage | 120V |
| No Load Speed | 3450 RPM |
| Table Size | 20 x 26 inches |
| Arbor Size | 5/8 inches |
Comprehensive list of safety rules for operating power tools to prevent accidents and ensure user protection.
Detailed guidance on preventing kickbacks and safe handling of the saw blade.
Step-by-step guide for correctly installing the blade guard assembly.
Detailed steps for safely removing and installing the saw blade.
Instructions on how to operate the power switch, including the safety key feature.
Procedures for making square cuts and performing repetitive cuts with the miter gauge.
Instructions for cutting wood along the grain using the rip fence.
Guidance on using safety aids like push sticks and auxiliary fences for ripping.
Instructions for cutting wood through its thickness, including safety warnings.
Procedure to ensure the blade is at a perfect 90-degree angle to the table.
Lists common problems like vibration or binding and their solutions.
Addresses issues related to excessive motor noise or overheating and their causes.
Solutions for problems like low power output, slow starting, or stalling.
Troubleshooting steps for starting relay failures and frequent fuse/breaker trips.
