TABLE OF LOOSE PARTS
ITEM DESCRIPTION QTY.
A Motor ............................... 1
B Basic Saw Assembly .................. 1
(Models 113.248210 and 113.248320
Do not include electronic
indicator system)
C Owners Manual ....................... 1
D Trim Cap, L.H ......................... 1
E Trim Cap, R.H ........................ 1
F Leg ................................ 4
G Lower Stiffener ....................... 4
H Sanding Platen ....................... 1
I Poly "V" Drive Belt .................... 1
J Pulley ............................... 1
K Loose Parts Bag
containing the following items:
Band Saw Blade 1/4 x 80 ................ 1
Sanding Belt 1/2 x 80 ................... 1
Handwheel Asembly ................... 1
Bag of Loose Parts #508014 ............. 1
Bag of Loose Parts #507968 ............ 1
Bag of Loose Parts #507741 ............. 1
Battery (Electronic Models Only) ......... 1
L Cabinet Assembly (Model 113.248510 Only) 1
M Leg Channel ........................ 1
NOTE: To avoid damage to the band saw leave it
laying on its left side until you are ready to mount it
to the leg set or cabinet. To prevent scratching the
finish, lay a piece of the packing box under the saw.
D E
I(
To Next Page
Loading...
Need help?
General