Craftsman 149.236321 User Manual

owners
manual
MODELNO.
149.236321
SERIAL
OR CODE
NUMBER:
Model and code number may be
found on the back of the base.
You should record both model and
code number and retain in a safe
place for future use.
CALIFORNIA OWNERS: a unique
serial code number is stamped on
the underside of the machine,
CAUTION:
Read All Instructions
Carefully Before Start-
ing Assembly and Use.
Save This Manual For
Future Reference.
SEA IRS / r.RRFT$MRN_._
5%-INCH
JOINTER-- PLANER
• assembly
• operating
• repair parts
SEARS, ROEBUCK AND CO., Dept. D/817WA, Hoffman Estates, IL 60195
Part No. 4551-252.00 7/90

Craftsman 149.236321 Specifications

General

Brand	Craftsman
Model	149.236321
Category	Planer
Language	English

Summary

General Safety Rules for Power Tools

Grounding Instructions

Proper grounding for electrical safety and preventing shock.

Keep Guards in Place

Ensure safety guards are in place and properly adjusted.

Remove Adjusting Keys and Wrenches

Avoid Dangerous Environments

Safety Rules for Jointer-Planer

Eye Protection

Always wear safety glasses for eye protection during operation.

Cutting Depth Limits

Do not exceed 1/8 inch cut per pass for safety.

Feed Workpiece Direction

Feed workpiece against cutter rotation for proper operation.

Keep Fingers Away From Cutter

Keep hands away from the revolving cutter; use fixtures when needed.

Cutter Head Guard Requirement

Never operate without the cutter head guard in place.

Avoid Forcing Cutting Action

Do not force cutting action; allow motor full speed for optimal performance.

Use Proper Aids and Fixtures

Maintain Sharp Cutters

Assembly

Chip Deflector Installation

Cutter Guard Assembly

Fence Assembly and Adjustment

Instructions for assembling and adjusting the jointer-planer fence.

Checking Cutter Blades

Procedure for checking cutter blade alignment and height.

Controls and Adjustments

Depth of Cut Hand Knob Adjustment

Fence Adjustment Procedure

Cutter Guard Function Check

Guard Stop Assembly

On-Off Switch Operation

Basic Jointer-Planer Operation

Setting the Guard Stop

Feeding the Work Piece

Techniques for feeding workpieces safely and accurately.

Using Hold Down/Push Blocks

Proper use of hold down/push blocks for safety and control.

Maintenance

Timing Belt Replacement

Cutter Guard Return Spring

Blade Replacement and Adjustment

Procedures for replacing and adjusting cutter blades.

Trouble Shooting Chart

Cutter Guard Malfunction

Chip Discharge Clogs

Cutter Slows Down During Operation