To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 315.220380 and is the answer not in the manual?
General| Model Number | 315.220380 |
|---|---|
| Type | Circular Saw |
| Blade Diameter | 7-1/4 inches |
| No Load Speed | 5000 RPM |
| Cord Length | 6 feet |
| Depth of Cut at 90 degrees | 2-3/8 inches |
| Depth of Cut at 45 degrees | 1-3/4 inches |
Emphasizes reading the manual and safety rules before operating the saw.
Covers safety symbols, operating precautions, electrical safety, kickback prevention, and workpiece handling.
Covers safe practices like checking parts, using correct blades, and maintaining guards.
Details critical safety measures for electrical connections, environment, and operator condition.
Explains kickback causes and how to prevent it, including blade path safety.
Ensures saw security, proper setup, and provides detailed guidance on avoiding kickback.
Details electrical connection, grounding, and voltage changing procedures.
Warns against connecting power during assembly to prevent accidental starting.
Diagrams and warnings for control cut settings and general safety.
Procedure to center the riving knife with the blade for rip cuts.
Warns that failure to check alignments can lead to poor performance or damage.
Details switch usage, kickback causes, and methods to avoid it.
