SEAR8
OWNERS
MANUAL
MODEL NO.
919.157251
|MI_ORTAN_:___
Re_l-_e Safety Guideines
and All Instructions Carefully
Before Operating.
CRRFTSMRN,
GASOLINE ENGINE
AIR COMPRESSOR
II
ASSEMBLY
OPERATION
MAINTENANCE
REPAIR PARTS
Record in the spaces provided.
(1) The model number which can be found
on the maintenance label onthe front of
the air tank.
(2) The cede number which can be found
onthefoil labelonthe rear ofthe airtank.
(3) The Manufacturers Number {ASME
Code Compressor only) is located on
the met a_data plate which iswelded
onto the backside of the air tank. (This
data plate is painted the same color as
thetank.)
(4) The Engine Manufacturer's name is
located onthe frontof the engine.
(5) The EngineModel Number stamped on
top oftheengine.
(6) The EngineType which can be found
stamped on top of the engine.
Retain these numbers for future
reference.
Model No.
Code No.
Mfg. No,
Engine Mfg. Name
Engine Mfg. Model
Engine Mfg, Type
• This product Is not equipped with a spark erresUlng muffler. If the product will be used around flammable
materials, or on land covered with materials such as agricultural crops, forest, brush, grass, or other similar
items, then an approved spark arrestor must be installed and is legally required in the state of California. It is a
violation of California statutes section 130050 and/or sections 4442 and 4443 of the California Public Resources
Code, unless the engine is equipped with a spark arrestor, as defined in section 4442, and maintained in effective
working order. Spark arrestors are also required on some U, S. Forest service land and may also be legally
required under other statutes and ordinances.
• Engine exhaust from this product contains chemicals known, in certain quantities, to cause cancer, birth defects or
other reproductive harm.
Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
D20396 Rev, 0 2/16/00
To Next Page
Need help?
General
