DM-MD8X8/16X16/32X32-CPU3
DigitalMedia™ Switchers
DocType - 8716A
(2055593)
04.20
Getting Started
Scan the QR code to view the Quick Start Guide.
www.crestron.com/docs/8345
For additional information on the
DM-MD8X8-CPU3, visit
www.crestron.com/model/6509617.
For additional information on the
DM-MD8X8-CPU3-RPS, visit
www.crestron.com/model/6509620.
For additional information on the
DM-MD16X16-CPU3, visit
www.crestron.com/model/6509618.
For additional information on the
DM-MD16X16-CPU3-RPS, visit
www.crestron.com/model/6509621.
For additional information on the
DM-MD32X32-CPU3, visit
www.crestron.com/model/6509619.
For additional information on the
DM-MD32X32-CPU3-RPS, visit
www.crestron.com/model/6509622.
Certification and Compliance
Regulatory Model: DM-MD8X8-RPS,
DM-MD16X16-RPS, DM-MD32X32-RPS
Federal Communications Commission (FCC)
Compliance Statement
This device complies with part 15 of the FCC Rules.
Operation is subject to the following conditions:
(1) This device may not cause harmful interference
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
CAUTION: Changes or modifications not expressly
approved by the manufacturer responsible for
compliance could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found
to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses and
can radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference to
radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does cause
To Next Page
Need help?
General