Crestron HD-EXT-USB-2000-C User Manual

DO GUIDE
HD-EXT-USB-2000-C
4K HDMI
®
and USB over HDBaseT
®
Extender 2000
DO Connect the Devices
Make connections to the transmitter and receiver as required for the application.
Connecting the Transmitter
Make connections to the front and rear panels of the transmitter.
Front Panel Connections
Rear Panel Connections
DO Install the Devices
The Crestron
®
HD-EXT-USB-2000-C consists of the HD-TX-USB-2000-C transmitter and the
HD-RX-USB-2000-C receiver. The transmitter and receiver can be mounted on a at surface or onto
a rack rail.
Mounting onto a Flat Surface
Using four mounting screws (not included), mount the transmitter and receiver onto a at surface
such as a wall.
Mounting onto a Wall
Mounting onto a Rack Rail
The transmitter and receiver can be mounted onto the front or rear rail of a rack. Position either the
left or the right mounting ange of the device so that the holes align with the holes in the rack. Then,
secure the device to the rack using two mounting screws (not included).
Mounting onto a Rack Rail
DO Check the Box
QTY PRODUCT PART NUM.
2 Connector, 2-Pin 2049091
1 Connector, 3-Pin 2049092
1 Connector, 5-Pin 2049093
HD-RX-USB-2000-C Only
1 Power Pack, 24 Vdc, 1.25 A, 100-240 Vac 2045870
HDMI IN:
From HDMI
®
audio/video
source
AUDIO IN:
From
unbalanced
analog audio
source
AUDIO IN:
From balanced/
unbalanced
analog audio
source
(Host):
To USB
device
(Device):
To USB
host
HDBT OUT:
To HDBT IN port
of receiver
IR IN:
From IR
receiver
IR IN:
From IR
receiver
IR OUT:
To IR
emitter
IR OUT:
To IR
emitter
COM:
To
RS-232
device
COM:
To
RS-232
device
:
10BASE-T/100BASE-TX
Ethernet to LAN

Crestron HD-EXT-USB-2000-C Specifications

General

Brand	Crestron
Model	HD-EXT-USB-2000-C
Category	Extender
Language	English