HD-MD-400-C-E
HD Scaling Auto-Switcher & Extender 400
crestron.com
|
800.237.2041
> 3x1+1 high-definition digital AV switcher, scaler, and extender
> Fully-automatic operation — no control system, control panel,
or programming required!
> Easy Web browser setup
> Integrates with Crestron Fusion
®
via the CEN-AVF-HUB
[9]
> Supports integration with a Crestron
®
control system for fully
programmable functionality
> Includes a compact transmitter and receiver
> Transmitter includes two HDMI
®
, one VGA, and one analog
audio inputs
[2,3,4]
> Receiver includes one HDMI input, one HDMI output, and one
analog audio output
[2,5,6]
> A single CATx cable links the transmitter to the receiver
[1]
> Supports cable lengths up to 230 feet (70 meters) between the
transmitter and receiver
[1]
> Automatically scales input signals to match the native resolution
of the room display
> Supports a range of display resolutions up to Full HD 1080p
and WUXGA
> Supports any input resolution up to Full HD 1080p and WUXGA
[10]
> Performs deinterlacing of NTSC, PAL, and 1080i sources
> Handles Dolby Digital
®
5.1, DTS
®
5.1, and uncompressed 7.1 linear
PCM audio
> Allows stereo audio extraction
[6]
> Provides up to 150 ms lip-sync audio delay
> QuickSwitch HD
™
technology manages HDCP keys for fast,
reliable switching
> Includes comprehensive built-in EDID configuration tools
> Provides a 10/100 Ethernet LAN connection
> Enables device control via CEC and RS-232
[8]
> Compact, low-profile surface mount design
> Universal 100-240V external power pack included
[12]
The Crestron
®
HD-MD-400-C-E delivers an incredibly simple and cost-
effective multimedia presentation solution for classrooms and meeting
spaces. It allows a laptop or mobile device to be connected to one of three
inputs at a table or podium, and routes the signal to a display or projector
up to 230 feet (70 meters) away. An additional AV source can be connected
at the display device location or through an optional wall plate. Fully
automatic operation detects when a source is connected or disconnected
at any input and turns the display on and off, alleviating the need for any
control panels or remotes. Built-in scaling ensures an optimal video image
for SD and HD video signals, as well as for high-res computer signals.
Composed of a compact transmitter and receiver pair, the HD-MD-400-C-E
installs in minutes and requires no special programming. The transmitter
mounts beneath the table or inside the podium, while the receiver mounts
behind the display or above the projector. The only connection required
between the transmitter and receiver is a single CAT type twisted pair
cable.
[1]
A LAN port on the receiver allows for connection to an Ethernet
network to enable easy setup and configuration via a Web browser.
Advanced functionality is enabled through integration with a Crestron
control system.
Multimedia Computer/AV Auto-Switcher
The HD-MD-400-C-E handles high-definition video and computer sources
with resolutions up to Full HD 1080p60, 1080i30, or WUXGA 1920x1200.
Two HDMI
®
inputs, one VGA input, and one analog audio input are provided
on the transmitter to support the connection of computers, mobile devices,
and other media sources. An additional HDMI input is provided on the
receiver, which may be wired to an optional wall plate or used to connect
a Crestron AirMedia
®
wireless presentation gateway or other multimedia
source installed permanently at the display device.
The inputs on each component can be configured to switch automatically
or be controlled through a Crestron control system. Auto-detection on
each input enables plug-and-play simplicity, supporting HDMI, DVI, or
Dual-Mode DisplayPort signals via any HDMI input, and VGA, RGB, or
component video via the VGA input.
[2,3]
The analog audio input works in
tandem with the VGA input.
[4]
To Next Page
Need help?
General
