Cub Cadet 1215 User Manual

PRODUCT GRAPHICS
Keep safety product graphics (decals) clean.
Replace any safety graphic that is damaged,
destroyed, missing, painted over or can no longer be
read. Replacement safety graphics are available
through your dealer.
A CAUTION
RECEIVE INSTRUCTION — Read operator s manual. Learn to operate this machine
SAFELY. Don't risk INJURY or DEATH.
1. Before starting engine or operation: Be familiar with controls. Be in operator's
position with transmission in neutral. PTO turned off, and brake depressed.
2. Keep shields in place. Keep away from moving parts
3. NO RIDERS! Keep all people and pets a safe distance away
4. Don't point mower discharge at people.
5. Avoid slopes. Tractors can be rolled over.
6. Before leaving operator s position
Shut off PTO. Place transmission in neutral Set parking brake. Shut off engine
Remove ignition key Wait for all movement to stop before servicing or cleaning
7 Do not fill gasoline tank when engine is running
Tighten cap securely.
L92-292C 3236
GENERAL SAFETY INSTRUCTIONS CAUTION LOCATED ON THE FRAME COVER.
_Acaution
Electrical system is 12 volt negative ground.
When using booster with jumper cables, precau
tions must be taken to prevent personal injury or
damage to electrical parts.
1. Attach one end of jumper cable to positive
terminal of booster battery and other end to
positive terminal of vehicle battery.
2. Attach one end of second cable to negative
terminal of booster battery and other end to
vehicle frame away from battery.
3. To remove cables, reverse above sequence
exactly to avoid sparks. See operator’s
manual for additional information.
CAUTION —BOOSTER BATTERY INSTRUCTIONS
LOCATED UNDER THE HOOD.
5

Cub Cadet 1215 Specifications

Capacities

fuel tank capacity	3 gals
crankcase capacity	3 pints
transmission capacity	1-1/2 pints
transaxle capacity	2-3/4 pints

Transmission

gears	5 forward speeds and 1 reverse
forward speed	0 to 5.5 mph
reverse speed	0 to 2.35 mph

Engine Specifications

engine make and model	Briggs and Stratton
engine power	12 HP
cylinders	1
bore	3.44 in
stroke	3.06 in
displacement	28.40 cubic inches
low speed	1750 RPM
high idle speed	3400 RPM +-100

Electrical System

system voltage	12 volt neg. ground
alternator	16 amp
fuse	20 amp slow blow
headlights	GE 12 volt 1156

Tires and Dimensions

front tire size	15x6-6
rear tire size	20x10-8
wheelbase	45.0 in
length	68.50 in
turning radius	29.00 in