Bracket Installation (54- and 60-inch decks)
Note: Removing the cutting deck from beneath the tractor
as instructed in your tractor’s Operator’s Manual will ease
installation of this kit.
4. Locate and discard the roller brackets used for 48-inch
decks.
5. Secure the three identical roller brackets for 54- and 60-
inch decks to the rear left, rear center and rear right of the
cutting deck with self-tapping screws. See Figure 1-3.
Figure 1-3
Roller Installation (all decks)
1. Position the rollers between the brackets as shown in
Figure 1-4.
2. Insert the pin through the brackets and rollers and secure it
in place with the hex lock nut. See Figure 1-4.
Figure 1-4
G
E
N
U
I
N
E
F
A
C
T
O
R
Y
P
A
R
T
S
To order replacement parts, call the Customer Dealer Referral Line at 1-877-282-8684
or visit www.cubcadet.com to find the nearest Cub Cadet dealer in your area.
To Previous Page
Loading...
Need help?
General
