Section 5 — operation 21
Checking the Safety Interlock Circuits
Periodically check the safety interlock circuits to ensure they are
working properly. If a safety circuit is not working as designed,
properly. To check the safety circuits, proceed as follows:
Momentarily turn the ignition switch to the start position;
the engine should not crank.
2. Move both control levers fully inward in the neutral
engine should stop.
With both control levers fully outward in the neutral/
4. Start the tractor and move the control levers inward to the
should disengage and the mower deck should stop.
To Next Page
Loading...
Need help?
General