Cub Cadet Z-Force S User Manual

10 Section 2— ASSembly & Set-Up
2. Remove the two shoulder bolts and lock nuts in the seat

Figure 3-3
 Rotate the seat into position and secure the seat into place
with the previously removed shoulder bolts and lock nuts.
Be careful not to crimp or damage the wire harness while

Figure 3-4
Adjusting the Seat
To adjust the position of the seat, push the seat adjustment lever
to the left. Slide the seat forward or rearward to the desired
position; then release the adjustment lever. Make sure seat is

Figure 3-5
Install the Rear Hitch Bracket
 Remove the hex flange screws and flange lock nuts that
secure the hitch bracket and muffler mount bracket to the

Hex Flange
Screws
Flange
Lock
Nuts
Hitch
Bracket
Muffler Mount
Bracket
Figure 3-6

Cub Cadet Z-Force S Specifications

General

Brand	Cub Cadet
Model	Z-Force S
Category	Lawn Mower
Language	English