Quick Installation Guide
1
Connect a computer to the LAN port of the router with an
RJ45 cable properly. If your computer is configured with
a fixed IP, change it to Obtain an IP address automatically.
2
Launch a web browser, and enter http://cudy.net/ or
http://192.168.10.1/ in the address bar. Use admin for
password to log in.
Note: If the login window does not appear, please refer to FAQ > Q1.
3
After a successful login, you can configure the function by
clicking the menu on the top of the screen.
Enjoy the internet!
Driver & Manual:
www.cudy.com/download
Email:
support@cudy.com
Need help?
Log In
admin
Auto
Password
http://cudy.net/
Internet
Modem
15 4 3 2
WANLAN WAN/LAN
Gigabit VPN Router
Power
System
Reset
R700
Connection
R700
Note: Use the power
adapter provided in the
package to power on
the router.
15 4 3 2
WANLAN WAN/LAN
Gigabit VPN Router
Power
System
Reset
R700
Router
PC
System Status General Settings Advanced Settings Diagnostic Tools
WAN1
Status Not connected
Protocol DHCP client
Status -
More Details
DHCP Server
Status Enabled
IP Start XXX.XXX.XX.X
IP End XXX.XXX.XX.X
More Details
LAN
Status Enabled
IP Address XX.XXX.XX.X
MAC-Address XX:XX:XX:XX
More Details
3 Gigabit
WAN/LAN Ports
1 Gigabit
WAN Port
1 Gigabit
LAN Port
Reset
Configure WAN/LAN Ports: General Settings -> WAN Mode
Setup Internet Connection: General Settings -> WAN Settings
Setup VPN Parameters: General Settings -> VPN