Safety
These systems have been especially de-
signed and appr
o
ved, complying with the
ECE-R44. regulation.
CUPRA recommends securing the child
seats shown on the website as described be-
low:
●
Child seats in the opposite direction of
travel (group 0+): ISOFIX and support peg
(ROMER BABY SAFE PLUS SHR II + ISOFIX
BASE / PEKE G0 I-SIZE + I-SIZE BASE).
●
Child seats in the direction of travel (group
1): ISOFIX and Top Tether (ROMER DUO
PLUS + TOP TETHER / PEKE G1 TRIFIX I-
SIZE).
●
Child seats directed towards the front of
the vehicle (group 2): safety belt and ISOFIX
(ROMER BRITAX KIDFIX
2
S).
●
Child seats directed towards the front of
the vehicle (group 3): safety belt (TAKATA
MAXI).
Follow the manufacturer's instructions and
observe any statutory requirements when in-
stalling and using child seats. Always read
and note
›››
page 33 .
We recommend you always carry the manu-
facturer's Child Seat Instruction Manual to-
gether with the on-board documentation.
Child seats group classification
Fig. 24
Examples of child seats.
Use only child seats that are officially ap-
pr
o
ved and suitable for the child.
These seats are subject to the ECE-R44 or
ECE-R129 standards. ECE-R stands for: Eco-
nomic Commission for Europe Regulation.
Child seats by weight group
The child seats are grouped into 5 catego-
ries:
Age group Weight of the child
Group 0 Up to 10 kg
Group 0+ Up to 13 kg
Group 1 From 9 to 18 kg
Group 2 From 15 to 25 kg
Group 3 From 22 to 36 kg
Child seats that have been tested and ap-
pr
o
ved under the ECE R44 or ECE-R129
standards bear the ECE-R44 or ECE-R129
test marks on the seat (the letter E in a circle
with the test number below it).
Follow the manufacturer's instructions and
observe any statutory requirements when in-
stalling and using child seats.
We recommend you to always include the
manufacturer's Child Seat Instruction Manual
together with the on-board documentation.
CUPRA recommends you use child seats
from the Original Accessories Catalogue.
These child seats have been designed and
tested for use in our vehicles. You can find
the right child seat for your model and age
group at our dealers.
Child seats by approval category
Child seats may have the approval category
of universal, semi-universal, vehicle specific
(all according to the ECE-R44 standard) or i-
Size (according to the ECE-R129 standard).
●
Universal: child seats with universal appro-
val can be installed in all vehicles. There is no
need to consult any list of models. In the
case of universal approval for ISOFIX, the
child seat is additionally provided with a Top
Tether belt.
●
Semi-universal: semi-universal approval,
in addition to the standard requirements of
32
To Next Page
Loading...
Need help?
General
