D-Link COVR-C1202 User Manual

19D-Link COVR-C1202 User Manual
Section 3 - Conguration
Static IP
Select Static IP if your IP information is provided by your Internet Service
Provider (ISP).
IP Address: Enter the IP address provided by your ISP.
Subnet Mask: Enter the subnet mask provided by your ISP.
Default Gateway: Enter the default gateway address provided by your ISP.
Primary DNS
Server:
Enter the primary DNS server IP address assigned by your ISP.
Advanced Settings
Secondary DNS
Server:
Enter the secondary DNS server IP address assigned by your ISP.
MTU: Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your ISP.
MAC Address
Clone:
The default MAC address is set to the physical interface MAC address
of port 1 on Covr Point A. You can use the drop-down menu to replace
the Internet port’s MAC address with the MAC address of a connected
client.
Click Save when you are done.

D-Link COVR-C1202 Specifications

General

Brand	D-Link
Model	COVR-C1202
Category	Network Router
Language	English