EasyManuals Logo
Home>D-Link>Wireless Access Point>DAP-1160

D-Link DAP-1160 Technical Specifications

D-Link DAP-1160
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
SEVEN OPERATION MODES
Can be flexibly configured to operate
as an Access Point, AP Client, Bridge,
Bridge with AP, Repeater, WISP Client
Router or WISP Repeater
TWO INTEGRATED ETHERNET
PORTS
Two Ethernet ports for ready connection
to two computers, or to an Ethernet-
enabled device (e.g. a broadband
router) and a PC
TOTAL SECURITY
Complete set of security features including WEP
encryption and WPA/WPA2 to protect network
against outside intruders
WIRELESS G ACCESS POINT
CONNECT HOME AND SOHO TO A WIRELESS NETWORK
Create a wireless network for your home and office using the D-Link DAP-1160 is an 802.11g standard Wireless Access Point. Connect this Access Point to a
broadband modem and wirelessly share your Internet connection. Enjoy surfing the web, checking e-mail, and chatting with family and friends online.
PROTECT WIRELESS NETWORK AND DATA
The DAP-1160 provides 64/128-bit WEP encryption and WPA/WPA2 security to protect your network and wireless data. In addition, it also provides MAC
address filtering and the Disable SSID Broadcast function to limit outsiders’ access to your home and office network.
FLEXIBLY CONFIGURE YOUR AP FOR DIFFERENT APPLICATIONS
The DAP-1160 can be configured to operate as (1) an Access Point to act as a central hub for wireless users, (2) an AP Client to connect to another Access
Point, (3) a Bridge to joint two wireless workgroups together, (4) a Bridge with AP to act as wireless hub and a bridge at the same time, (5) a Repeater to
extend the wireless coverage to cover all “dead” spots, (6) a WISP Client Router to let wireless Internet service subscribers share Internet connection with
home/office Ethernet-enabled computers without the need for an extra router, or (7) a WISP Repeater to let WISP subscribers share Internet connection with
wireless computers without any extra router.
EASY TO INSTALL AND USE
With D-Link Click n’Connect, you can set up your wireless network in minutes. It configures your DAP-1160’s operation mode, makes it easy to add new
wireless devices onto the network, and helps you create a simple wireless network for your home and office.
DAP-1160 CREATE A WIRELESS NETWORK

Other manuals for D-Link DAP-1160

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link DAP-1160 and is the answer not in the manual?

D-Link DAP-1160 Specifications

General IconGeneral
Channels quantity2 channels
Ethernet LAN data rates100 Mbit/s
Maximum data transfer rate54 Mbit/s
InternalNo
MAC address filteringYes

Related product manuals