D-Link DAP-1320 Installation And Setup Guide

1
How do I setup and install my DAP-1320?
How do I setup and install my DAP-?
The DAP-1320 can be setup by two different methods:
1. Push button WPS (Wi-Fi Protected Setup)
2. Manual
Note: In order to setup the DAP-1320 using WPS, you must have a WPS compatible router/access
point
Push Button WPS
Step 1: Plug in the DAP-1320
Note: The light should turn red and then start blinking orange
Step 2: Press the WPS button on your router/AP

D-Link DAP-1320 Specifications

Wireless Standards and Antennas

wireless standards	IEEE 802.11n, IEEE 802.11g
antenna type	2 Internal Antennas

Weight and Dimensions

dimensions	1.89” x 1.65” x 2.11” (4.8 x 4.19 x 5.36 cm)
weight	0.152 lb (68.94g)