D-Link DAP-1330 Technical Support Setup Procedure

Technical Support Setup Procedure
Page | 1
How to configure DAP-1330 as Access Point with non-default
wireless SSID?
(Note: Please ensure the device LED is blinking orange colour before you do
setup.
If it is not blinking in orange colour, follow the guide on page 3 on how to reset
the device before follow the guide to setup.)
Step 1: Copy down the wireless name and password that was on the sticker of the device.
Step 2: Plug DAP-1330 direct to power outlet.
Step 3: Click on the Computer Icon on the right bottom side of the Windows. Select the Wireless
network name that was copy down.
Step 4: Enter the Wifi Password which had copy down earlier on. Click on OK.

D-Link DAP-1330 Specifications

General

Product color	White
LED indicators	Yes
Maximum data transfer rate	100 Mbit/s
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3u
Interface	Wi-Fi/Ethernet
Ethernet LAN (RJ-45) ports	1
Security algorithms	WPA, WPA2, WPS
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Operating altitude	5 - 95 m
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Certification	FCC, IC, CE, C-Tick, CB, UL

Weight and Dimensions

Weight	86.9 g
Dimensions (WxDxH)	77 x 55.5 x 34 mm