D-Link DAP-1330 Technical Support Setup Procedure

Technical Support Setup Procedure
Page | 3
Step 11: Click on Save.
Step 12 a) Plug DAP-1330 direct to power outlet.
b) Connect LAN Cable from DAP-1330 to LAN port of the Router.
Step 13: Use computer to connect to the wireless you had setup.
--- END ---
How to reset DAP-1330?
Step 1: Plug DAP-1330 direct to power outlet.
Step 2: Power on DAP-1330 and wait for 1 min.
Step 3: Use a paper clip to press and hold the Reset Button for 30 second.
Step 4: Wait for 2 min for the device to fully power on after reset.
--- END ---

D-Link DAP-1330 Specifications

General

Product color	White
LED indicators	Yes
Maximum data transfer rate	100 Mbit/s
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3u
Interface	Wi-Fi/Ethernet
Ethernet LAN (RJ-45) ports	1
Security algorithms	WPA, WPA2, WPS
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Operating altitude	5 - 95 m
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Certification	FCC, IC, CE, C-Tick, CB, UL

Weight and Dimensions

Weight	86.9 g
Dimensions (WxDxH)	77 x 55.5 x 34 mm