EasyManuals Logo
Home>D-Link>Security Camera>DCS-932L

D-Link DCS-932L Installation Guide

D-Link DCS-932L
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
D-Link Technical Support – How to install the DCS-932L. Page 2 of 16
1. Connect the included Ethernet cable to the network cable connector located on the top panel at the rear
of the DCS-932L and attach the other end to your network, the network will usually be a LAN port on your
Router.
Ensure to attach the external power supply to the DCS-932L as well.
2. Insert the Installation CD-ROM into your computer's optical drive and start the autorun program. You can
also browse the contents of your computer's optical drive and double click on the "autorun.exe" file as well.
If you have downloaded the Setup Utility from the D-Link Support Knowledge Base, and have extracted the
archive (*.zip file), you can also double click on the "autorun.exe" file as well.
NOTE: For any prompts that require permission to run, it is best to 'Allow', 'OK' and or 'Accept' the files to
run and or be installed.
3. Click the Start button to begin the setup:

Other manuals for D-Link DCS-932L

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link DCS-932L and is the answer not in the manual?

D-Link DCS-932L Specifications

General IconGeneral
Maximum resolution640 x 480 pixels
Supported video modes-
Video formats supportedM-JPEG
Supported graphics resolutions640 x 480 (VGA)
White balanceAuto
Minimum illumination1 lx
Sensor typeCMOS
Optical sensor size1/5 \
Digital zoom4 x
Optical zoom- x
Security algorithmsWEP, WPA, WPA2
Ethernet LANYes
Cabling technology10/100Base-T(X)
Supported network protocolsIPV4, ARP, TCP, UDP, ICMP, DHCP, NTP, DNS, DDNS, SMTP, FTP, HTTP, PPPoE, UPnP, LLTD
AC input voltage100-240 V
DC output current1.2 A
DC output voltage+5V
AC input frequency50 - 60 Hz
Power consumption (typical)2 W
Certification- FCC - B - IC - C-Tick - CE
Placement supportedIndoor
Connectivity technologyWired & Wireless
LED typeIR
Dimensions (WxDxH)65.8 x 65 x 126 mm
Minimum RAM128 MB
Minimum processor1.3 GHz
Mac operating systems supportedMac OS X 10.5 Leopard
Cables includedLAN (RJ-45)
Built-in HDDNo
Flash memory4 MB
Internal memory32 MB
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)20 - 80 %
Product colorWhite
Ethernet LAN (RJ-45) ports1
Weight and Dimensions IconWeight and Dimensions
Depth60 mm
Width27.2 mm
Height96 mm
Weight76.9 g

Related product manuals