10D-Link DCS-933L User Manual
Section 2 - Installation
I you have a mydlink-enabled Cloud Router, you can take advantage o the Zero Conguration eature. Zero Conguration
automatically congures your camera's settings or you by adding the inormation to your mydlink account. This type o setup
allows you to set up your camera by simply plugging it in and connecting it to your router.
Connect your camera to your mydlink-enabled Cloud Router and Zero Conguration will automatically congure your DCS-933L
and add the camera to your mydlink account. With this quick and easy setup, you can remotely access your camera rom the
www.mydlink.com website to manage and monitor your DCS-933L.
Zero Confguration Setup
Connect the Ethernet Cable
Use the included Ethernet cable and plug it into the camera. Plug the other
end into an available port on your router. I you wish to use your camera
wirelessly, you will be able to remove the cable ater Zero Conguration
Setup is complete.
Attach the External Power Adapter
Connect the power adapter to the power connector on your camera, then
plug the power adapter into a wall outlet.
To Next Page
Loading...
Need help?
General
