D-Link DES-1005P Quick Install Guide

2D-Link DES-1005P Quick Install Guide
Package Contents
If any of the above items are missing, please contact your reseller.
• DES-1005P 5-Port Desktop Switch with 1 PoE Port
• Power Adapter
• Four (4) Rubber Feet
The setup of the Switch can be performed using the following steps:
• Visually inspect the power jack and make sure that it is fully secured to the
power adapter.
• Do not cover the ventilation holes on the sides of the Switch, and make
sure there is adequate ventilation around it.
• Do not place heavy objects on the switch.
• Place the Switch in a cool and dry environment.
Before You Begin
Connecting the Switch
Step 1
Plug the supplied power adapter into the Switch and the other end into
a power outlet, power strip, or surge protector (recommended). Verify the
Power indicator is lit on the Switch.
Step 2
Connect one end of an Ethernet cable into the device you want to connect
to the Switch and the other end into one of the Ethernet ports on the Switch.
Check the Link lights (LEDs) on both the Switch and the device to verify that
the cable is good and that there is a valid connection. Port 1 can be used to
connect to Power over Ethernet (PoE) devices.
Introduction
The D-Link DES-1005P is an unmanaged PoE switch capable of providing
power to a Power over Ethernet (PoE) device such as a network camera or
wireless access point. The DES-1005P has ve 10/100Mbps ports with 1 port
capable of PoE (Port 1), which is useful for home and small oce businesses
who have limited budgets or compact space requirements

D-Link DES-1005P Specifications

General

MAC address table	2000 entries
Store-and-forward	Yes
Maximum data transfer rate	0.2 Gbit/s
Supported data transfer rates	10/100 Mbit/s
10G support	No
Networking standards	IEEE 802.1p, IEEE 802.3, IEEE 802.3af, IEEE 802.3u, IEEE 802.3x
Ethernet LAN data rates	10, 100 Mbit/s
Copper ethernet cabling technology	100BASE-TX, 10BASE-T
Networking features	Fast Ethernet
Packet transfer speed	148800 pps
Switch type	Unmanaged
Switch layer	-
Power connector	DC-in jack
Basic switching RJ-45 Ethernet ports quantity	5
Power over Ethernet (PoE) ports quantity	1
Power consumption (typical)	1.8 W
Certification	RoHS, FCC, ICES-003, cUL
Product color	Black
LED indicators	Link, PoE
Mean time between failures (MTBF)	324616 h
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	0 - 95 %

Weight and Dimensions

Depth	85 mm
Width	140 mm
Height	28 mm