D-Link DSL-2750U Technical Support Setup Procedure

Technical Support Setup Procedure
Manually Configuring Bridge Mode on the DSL-2750U
Step 1: Open a web browser such as Internet Explorer, Mozilla Firefox, Safari and etc. On the Address
bar type in the LAN IP Address of the DSL-2750U which is 192.168.1.1 and then press on the Enter
key on your keyboard.
Step 2: A login screen will appear, type in the User Name and the Password as “admin” all in lower
case and then type in Validate Code and then click on the Log In button.
Step 3: Click on the SETUP tab and then select on Internet Setup on the left hand side. Under the
WAN Setup, click on the button Add.

D-Link DSL-2750U Specifications

Data Transfer Rates

G.dmt full rate downstream	up to 8 Mbps
G.dmt full rate upstream	up to 1 Mbps
G.lite ADSL downstream	up to 1.5 Mbps
G.lite ADSL upstream	up to 512 Kbps
G.dmt.bis full rate downstream	up to 12 Mbps
G.dmt.bis full rate upstream	up to 12 Mbps
ADSL full rate downstream	up to 24 Mbps
ADSL full rate upstream	up to 1 Mbps

Media Interface

ADSL interface connector type	RJ-11
ADSL interface cable type	24/26 AWG twisted pair telephone line
LAN interface port type	RJ-45
LAN interface standard	10/100BASE-T Ethernet