D-Link dsl-520t Quick Installation Guide

2
Connecting the Router to Your Computer
A. First, connect the power adapter to the receptor at the back panel of the
DSL-520T and then plug the other end of the power adapter to a wall outlet or
power strip. The Power LED will turn on to indicate proper operation.
B. Insert one end of the cable into any Ethernet port on the back panel of the
DSL-520T and the other end of the cable to an Ethernet Adapter or available Ethernet
port on your computer.
Ethernet Ports
Connect to Ethernet cable
Power Input
Connect to
power adapter
ADSL Port
Connect to
ADSL line
Reset Button

D-Link dsl-520t Specifications

General

Brand	D-Link
Model	dsl-520t
Category	Network Router
Language	English