D-Link DWR-116 User Manual

73D-Link DWR-116 User Manual
Section 5 - Connecting to a Wireless Network
Windows Vista®
Windows Vista® users may use the built-in wireless utility. If you are using another company’s utility, please refer to the user
manual of your wireless adapter for help with connecting to a wireless network. Most utilities will have a “site survey” option
similar to the Windows Vista® utility as seen below.
Right-click on the wireless computer icon in your system tray (lower-right
corner next to the time). Select Connect to a network.
If you receive the Wireless Networks Detected bubble, click on the
center of the bubble to access the utility.
or
The utility will display any available wireless networks in your area. Click
on a network (displayed using the SSID) and click the Connect button.
If you get a good signal but cannot access the Internet, check you TCP/
IP settings for your wireless adapter. Refer to the Networking Basics
section in this manual for more information.

D-Link DWR-116 Specifications

Data Rates and Standards

data rates in 802.11n mode	300, 150, 135, 120, 90, 60, 45, 30, 15 Mbps
data rates in 802.11g mode	6/9/11/12/18/24/36/48/54Mbps
data rates in 802.11b mode	1/2/5.5/11Mbps

Frequency and Security

frequency	2.4 - 2.4835 GHz
wireless security	64/128-bit WEP, WPA & WPA2

Ports and Antenna

ports	4 x LAN (RJ-45), 1x WAN, 1 x USB

Power and Dimensions

power adapter	External 5 V DC 2 A
dimensions	148.5 x 113.5 x 25 mm, 5.85 x 4.47 x .98 inches

Operating Environment

operating temperature	0 to 40 °C, 32 to 104 °F
operating humidity	10% to 95% non-condensing